Created by Ronan Loughman
College Lacrosse ranking project · seasons 2022–2026

Powerwise vs. RPI

See how a proposed team-ranking system compares with the rankings and tournament fields from 2022–2026. Everything is explained in plain language, including what the project assumes.

Powerwise: Teams are compared in pairs. The better direct result earns a point; if there is no clear result, compare games against the same teams, then a score-and-location rating. Rank change: RPI place minus Powerwise place. +5 means Powerwise puts the team five places higher. Bid changes are hypothetical.

Powerwise impact: who moves up or down?

A team moving up means Powerwise gives it a better rank number than RPI does. Moving up does not guarantee an NCAA bid.

Biggest rank boosts

Biggest rank drops

Who would gain or lose an at-large bid?

An automatic bid goes to a conference champion. At-large bids are the remaining spots. The project keeps the real automatic bids, then gives the same number of at-large spots to the highest-ranked eligible teams. This is a possible result under the project’s assumptions, not an official NCAA decision.

Patterns across seasons

These are patterns in the project’s calculations. They show how the lists and hypothetical fields differ; they are not official NCAA decisions.

Who moves up?

Teams that beat one another or did well against the same opponents may rank higher under Powerwise. A higher place alone does not guarantee an NCAA bid.

Who moves down?

A team may rank lower under Powerwise if its direct results or score-based rating are weaker. This matters most for teams close to the last at-large spot.

Teams that often move up or down

“Net places” adds the rank difference across seasons. A positive total means the team usually ranked higher under Powerwise. It does not mean the team earned that many extra NCAA bids.

Most often ranked higher by Powerwise
TeamSeasons ranked higherNet placesAdded bids
Most often ranked lower by Powerwise
TeamSeasons ranked lowerNet placesLost bids

Big differences between the two lists

These teams are at least 15 places apart in the two rankings. This is a simple way to flag large differences, not a formal statistical test.

SeasonTeamRPI placePowerwise placePlaces apartReal tournament?What-if field?

Powerwise in plain English

Powerwise is a proposed way to rank college lacrosse teams. Imagine every team faced every other team. For each pair, the team with the better results earns one point. The team with more points ranks higher. It uses games already played; it does not create or predict games.

How it gives out points

1. If they played, compare those results. 2. If not, compare results against the same opponents. 3. If still tied, use a rating based on scores and whether games were home, away, or neutral. Score margins count only up to seven goals. The winner of each comparison gets one point.

What this project assumes

It uses games through Selection Sunday. Real conference champions keep their automatic spots; Powerwise fills the remaining open spots (at-large bids). Seeds, matchups, and hosts are project assumptions. No games are simulated.

RPI summarizes wins and schedule strength; the NCAA committee considers it with other factors. Powerwise is a proposal, not the current selection rule.

How close are the rankings?

Each dot is a team. Hover to see its name and click to select it. A lower rank number means a higher place on the list.

Made the real NCAA tournamentDid not make the real tournament

Season summary

Actual champion

Compare every team

RPI is the NCAA’s score based on wins and schedule strength. Rank difference = RPI place minus Powerwise place. +5 means Powerwise puts the team five places higher.

Powerwise placeTeamPowerwise pointsRPI scoreRPI placeRank differenceReal tournament?
Actual NCAA bracket

Real NCAA bracket

This is the real tournament bracket, including teams, seeds, scores, and game locations. Quarterfinals and later were played at neutral sites.

Powerwise what-if bracket

How the Powerwise what-if bracket is made

The project uses the Powerwise ranking to choose the what-if at-large teams. It also makes the assumptions below. RPI is shown for comparison, but it does not choose teams in this bracket.

1
Keep the real conference champions
The project keeps each season’s actual automatic bids. It does not replay conference tournaments to decide who wins them.
2
Keep the same number of open spots
Each what-if field has the same number of at-large spots as the real tournament that season.
3
Only consider eligible teams
A team must have at least as many Division I wins as losses and must not already have an automatic bid.
4
Fill spots from the top of the Powerwise list
Among eligible teams without an automatic bid, the highest-ranked teams get the open spots. RPI does not choose or break ties in this what-if selection.

These rules make this a what-if, not an official field. The NCAA has not adopted Powerwise; its September 2026 report said the idea still needed review.

Powerwise what-if bracket

This shows a possible field and bracket path. It does not predict scores or winners. Assumptions: actual conference champions stay in; Powerwise fills the open spots; the lowest-ranked automatic-bid teams play in the opening round; the top eight remaining teams are seeded; and the higher-ranked team is assumed to host campus games. These bracket and host choices are project decisions, not rules given by the proposal.

Where games are played

For opening- and first-round games, “Home” means the project assumes the higher-ranked team hosts. Actual hosting would depend on NCAA site bids. Later rounds are neutral-site. The proposal does not set exact bracket pairings.

RPI and Powerwise: two ways to rank teams

RPI looks at wins and schedule strength. Powerwise compares teams directly, using scores only when the game results do not settle the comparison.

RPI

A record-and-schedule score

RPI combines three things: how often a team wins, how often its opponents win, and how often those opponents’ opponents win. The men’s lacrosse formula gives those parts 25%, 50%, and 25% of the score.

Winning by 10 goals does not count more than winning by 1. RPI is one factor the NCAA committee considers today; it does not automatically award a tournament spot.

Powerwise

Imagine every team played every other team

For each pair of teams, give one point to the team with the better record against the other. If they did not play or tied, compare their records against the same opponents. If that still does not decide it, use a Power Rating based on scores and where games were played. “Common opponents” means teams both teams played.

The Power Rating counts no win or loss as more than a seven-goal margin. That limits the benefit of running up the score.

How are NCAA teams chosen today?

Today

Conference champions receive automatic bids. A committee picks the remaining at-large teams using several factors, including RPI, schedule strength, and results against other teams. It does not simply take the top RPI teams.

If the proposal is adopted

The proposal would use the Powerwise list to choose at-large teams after automatic bids are awarded. The NCAA would still run the tournament. Powerwise is not the current rule; the NCAA was still reviewing it in September 2026.

In short: RPI looks at wins and schedule strength. Powerwise compares teams one pair at a time. The alternate bracket shows what might happen under this project’s rules; it is not an official NCAA bracket.

The NCAA RPI formula is public. Powerwise remains a proposal under review. This project discloses its estimated home-field adjustment and other reconstruction choices.

How ties are decided

A tie can happen when comparing two teams or when teams finish with the same total points.

1
Head-to-head
If the teams played each other, the team with the better record in those games gets the point. If they tied or never played, go to step 2.
2
Common opponents
Compare each team’s win percentage against the same opponents. This project uses that comparison even if they shared only one opponent; the proposal says that one shared opponent may be skipped. If they are still tied, go to step 3.
3
Power Rating
Use the higher Power Rating. It estimates team strength from game scores and where games were played; score differences count only up to seven goals.

If teams finish with the same Powerwise points

Compare only the tied teams’ results against one another. For two teams, the better record goes first. For three or four teams, make a small standings table from their games against each other. If some are still tied, repeat the tie rules for that smaller group. If everyone is still tied—or more than four teams are tied—use Power Rating.

Three-team example

Team A is 2–0 against the other tied teams, Team B is 1–1, Team C is 0–2. Order them A, B, C. If all are 1–1, the Power Rating decides.

Why it matters

Teams can finish with the same point total. These rules decide who goes higher on the final list.

The tie steps are based on the proposal’s Appendix D. Where the proposal leaves room for interpretation, this project uses the choice stated above.

Number definitions

Definitions for the words and numbers used in the dashboard.

Powerwise placeA team’s position in the Powerwise list. #1 is highest.
Powerwise pointsHow many of its one-on-one comparisons the team won. More points usually means a higher place.
RPI scoreA score from 0 to 1 based on wins and schedule strength. Higher scores rank better.
RPI placeThe team’s position in the RPI list. #1 is highest.
Rank differenceRPI place minus Powerwise place. +10 means Powerwise places the team 10 spots higher.
Power RatingA team-strength score estimated from game scores and whether each game was home, away, or neutral. The margin is capped at seven goals.
SeedA team’s numbered place in a bracket. #1 is the top seed. In the what-if bracket, the project assumes some teams host; the NCAA would decide actual hosts.
Automatic bidA spot awarded to a conference champion. (The proposal uses “AQ,” short for automatic qualifier.)
At-large bidA spot the NCAA gives to a team that did not receive an automatic conference bid.
Home / AwayThe actual bracket shows the official host. In the what-if bracket, “Home” is an assumption: the higher-ranked team is shown hosting. Neutral-site games are played at neither team’s campus.
How similar are the rankings?This number shows whether the two lists put teams in a similar order. 1.00 means almost the same order; it is not an accuracy percentage. A team can still move many places.
Not simulatedThe what-if bracket shows who could play whom. It does not predict scores, winners, or a champion.
The rankings use games through Selection Sunday. NCAA tournament scores appear only in the actual-bracket tab and are never fed into that season’s ranking.
Sources, assumptions, and calculation checks

Here is what went into the rankings and what the what-if brackets assume.

1. Which games count?

For each year, the project counts Division I games played up to the NCAA selection day (Selection Sunday). It includes conference tournament games, but does not use later NCAA tournament games to rank teams for that year. Scores were checked against NCAA and school records. Team lists come from archived season records; they are not a separately certified NCAA membership count.

2. How are teams ranked?

RPI: This NCAA score combines a team’s wins with how strong its opponents and their opponents were. The formula weights those three parts 25%, 50%, and 25%. This project recalculates RPI from game results.

Powerwise: Imagine every team played every other team once. For each imaginary matchup, the team with the better direct record gets a point. If the teams did not play or are tied, compare how they did against opponents they both played. If that still does not settle it, compare their Power Ratings, which use scores and game location. Score margins count only up to seven goals.

Home-field assumption: The proposal says home field should count but does not give one required number. This project estimates one shared home-field adjustment for each season. It then chooses team ratings that fit all the adjusted game scores as closely as possible. Using a different home-field estimate could change some ratings.

3. What does the Powerwise what-if bracket assume?

  • Real conference champions keep their automatic bids; this project does not replay conference tournaments.
  • The what-if bracket has the same number of at-large spots as the actual tournament.
  • A team must have at least as many Division I wins as losses to be considered.
  • The remaining spots go to the highest-ranked eligible teams without automatic bids. RPI does not choose these teams.
  • The project uses the Powerwise order for seeds, places the lowest-ranked automatic-bid teams in opening games, and assumes the higher-ranked campus team hosts early games. It follows a fixed bracket layout.
  • The proposal does not give exact bracket pairings, site bids, travel rules, or a full tournament placement formula. Those parts are project assumptions. No scores or winners are simulated.

4. What does the 2024 comparison show?

The project’s 2024 team order is very close to the proposal’s published order: rank similarity is 0.994 on a scale where 1.00 means the same order. This is not “99.4% accuracy.” The proposal’s printed point totals add up to one more point than its 76 teams can produce if each pair gets one point. No correction is listed, so the project keeps the printed numbers and compares the order instead of guessing which number to change.

As another check, the project’s share of matchups decided by direct results is close to the proposal’s example. The shared-opponent percentages differ slightly; the paper does not specify every detail needed to know exactly why.

5. What does the RPI check mean?

The project compared its recalculated RPI scores with a third-party archive of end-of-season scores. Those are not official NCAA scores from Selection Sunday, and the comparison uses full-season results, including tournament games. So this check is useful for comparison, but it does not prove every reconstructed RPI value is correct. The dashboard labels project RPI values as reconstructed.

6. Is Powerwise the NCAA rule?

No. The NCAA still uses its committee and current selection rules. As of the September 2026 report, the NCAA was still reviewing the Powerwise idea. The Powerwise bracket here is a historical what-if, not an official NCAA bracket.

Technical check numbers

For 2024, the published and reconstructed Powerwise orders have a Spearman correlation of 0.994 across 76 teams. In 2023 and 2024, the project’s head-to-head matchup shares round to the proposal’s values (17.6% and 17.8%). Common-opponent matchup shares are 46.1% and 44.6%, compared with 45.2% and 45.1% in the proposal.

The RPI archive matches to four decimal places for 21/73 teams in 2022, 12/75 in 2023, 76/76 in 2024, 2/77 in 2025, and 4/77 in 2026. These are comparisons to a third-party full-season archive, not official NCAA Selection Sunday tables.

Sources

Remember: The calculations reproduce from the project’s saved data and rules. That does not make the reconstructed rankings official NCAA results.

Army Lacrosse: what might have changed?

See how Army ranks in both systems and whether it makes the project’s possible tournament field. Choose a season above to highlight that year.

Five-season rank patternHigher in 3 · same in 2Powerwise place compared with RPI place
Hypothetical bid changeWould get a bid in 2025Chosen for an open tournament spot
Actual conference bid seasons2023, 2026These real bids stay in the what-if
Game resultsNot predictedNo scores or winners are predicted
Quick takeaway: Army is ranked higher by Powerwise in three seasons and the same in two. In this project’s what-if field, Army gets an at-large spot in 2025. Its actual conference bids in 2023 and 2026 stay in place. Army is outside the hypothetical field in 2022 and 2024. These results do not change the games or prove what the NCAA would have chosen.

Army, season by season

Rank #1 is highest. A bid is not guaranteed by rank: each year has a limited number of at-large places. The what-if uses the real conference champions and requires an eligible team to have at least as many wins as losses.

SeasonRPI placePowerwise placeWhat happenedPowerwise what-ifSimple explanation
Why does Army move up?

In 2022, 2024, and 2025, Powerwise gives Army a better place than RPI does. Powerwise compares direct results, results against shared opponents, and then scores adjusted for game location. RPI uses wins and the strength of the schedule.

What this does not mean

It does not mean Army would have played different games or won the NCAA tournament. The project keeps actual conference bids fixed and only changes who gets the at-large spots. It does not simulate game scores or winners.